Ever since the first caveman scorched his beard trying to chase the darkness away, man has been looking for better ways to light up the night. When the sun goes down, humans want some illumination to help chase away the imagined ghosts and goblins lurking out there in the blackness.
Various types of lanterns have served as man's primary light source for centuries. Many early versions incorporated candles to produced illumination. Others were fueled by some type of animal oil. For example, whale oil lanterns were popular in the early nineteenth century, and lanterns that burned oil rendered from the fat of other animals and from various types of seeds were used throughout much of the 1800s as well. These lanterns burned some type of wick or had an open flame.
In the mid-1800s, kerosene came into wide use as a lantern fuel. Because it is cheap and readily available, kerosene is still burned in lanterns in many parts of the world.
The 20th century brought new innovations in lantern design, including the popular Coleman lantern, which was introduced in 1914 and is still widely used today.
In the 21st century, there are even more lantern choices for campers and others who need a light source where electricity is not available. Here are the primary types now in use, and the pros and cons of each to help you make the right selection.
Fuel lanterns are for outdoor use only. These produce very bright light, although some like the Coleman lantern are adjustable and can be turned down to a low setting for a nice ambient light. (This fact seems to be lost on many people who only know to run them at full throttle.)
The two primary kinds of fuel lanterns are propane lanterns and liquid fuel lanterns.
|The convenience of using disposable, screw-on propane cylinders had made these more popular than liquid fueld lanterns.|
Liquid fuel lanterns are the more traditional type. They run on Coleman liquid camp fuel, which is often called white gas. (Its technical name is naptha.) Many of today's liquid fuel lanterns also are available in dual fuel models, which means they are designed to run on liquid camp fuel or unleaded gasoline.
Liquid fuel lanterns require that the fuel be poured from a storage can into the lantern's small gas tank. Then, the lantern must be pumped up via a small thumb pump to pressurize the tank.
Propane lanterns, the second type of fuel lanterns, typically run on 16.4-ounce (often called one-pound) disposable propane cylinders. The cylinders attach to the lantern by simply threading them onto a fitting. A plastic base then snaps on the bottom of the cylinder to provide a stable base so the lantern can be placed on a table or other surface.
The convenience of using disposable, screw-on cylinders has made propane models more popular than liquid fuel lanterns over the past 15 years. There's no need to pour fuel, no spillage possibility, and no need to pump.
Propane lanterns also can be purchased with an electronic ignition option, meaning no matches are required to light the lantern. This is another popular feature not available on most liquid fuel lanterns.
Both liquid fuel and propane lantern types use mantles-small, woven fabric bags that attach to the burners and ultimately produce the illumination. Single and double mantle models are available. Double-mantle models are typically brighter and slightly more expensive.
Mantles are available now that "clip on," using a simple wire clip that easily slips in place. Tie-on mantles, the old-fashioned type, are still in use as well. Although today's mantles are considerably stronger and more durable, and have been engineered to produce a whiter light, they are still the most fragile component of a lantern. Spare mantles should be a part of any camper's standard supplies.
Conventional wisdom suggests that one's camp lantern and camp stove should run on the same fuel. For example, if you prefer a propane stove, then you should consider buying a propane lantern so you only have to take one supply of fuel on camping trips.
Propane lanterns are comparatively less expensive to purchase (comparing two-mantle standard to two-mantle standard). Liquid fuel lanterns are less expensive to operate, although both types are inexpensive to run on a per hour basis. Both have similar run times, about seven hours on high per tank of fuel, or about 14 hours on low. Propane lanterns have a more consistent brightness over time (each tankful that is) because of pressure regulators, whereas a liquid fuel lantern might need to be repressurized, or pumped up, once or twice during the course of its run time to use a tank of fuel.
Battery lanterns come in many varieties and are the best type of lantern for use in a tent or indoors. They also are useful outside as well, and are the best choice for kids to handle. Unfortunately, battery lanterns are not nearly as bright as fuel lanterns.
Most battery lanterns use primary cell batteries (D-cells, C-cells or 9-volts). These must be replaced when they expire, although one also has the option of buying rechargeable batteries and a recharger. (Few people actually do, it seems.) Spare new batteries should be carried on any trip longer than one night.
|Non-gas lanterns can be used inside tents and can be very compact.|
The type of bulb or bulbs used by your lantern is another thing to consider. Lanterns that incorporate classic bulbs provide brighter illumination but have a significant battery consumption. Lanterns that use LED technology provide a bit lower illumination but use far less energy than a traditional bulb and last much longer. (LED lamps can burn more than 100 000 hours.) Combined lanterns (bulb and LED) provide the best of both worlds. You can basically adjust the brightness and thus energy consumption level of your lantern.
Rechargeable lanterns also are available. These have built-in rechargeable batteries. Although the run times vary considerably, there are models that have run times that are approximately the same as primary cell battery-powered lanterns. It is important to read the owner's manual on all products to understand what each manufacturer outlines as the product's run times charging time and so forth.
Some models can only be recharged with a 110-volt household current. Others incorporate 12-volt recharging cords so they can be plugged into a vehicle's cigarette lighter or power plug.
A good rule of thumb is, the more batteries and the more light tubes or light bulbs, the brighter the lantern or lamp is likely to be. Typically, the run time is longer, too, but consumers should read the package carefully to see what manufacturer's specifications are. Many lanterns offer a high and low setting, which will determine run time as well as brightness.
There are a number of styles available, too, from those that look like classic Coleman lanterns to very contemporary styles and colors. Coleman offers one model that even features a remote switch, allowing the lantern to be turned on, off and changed to one of its three brightness settings from a distance of up to 50 feet away. It has a built-in nightlight that will run for 100 hours.
In the end, you should consider all the pros and cons of each type of lantern before deciding which is best for you. Fortunately, there are many different models from which to choose, and one of them is sure to be just right for your needs.